Allow to add markers in the chart, this way unusual events can be tagged on the chart area. A pop-up window can display the text as you do with the battery SOC, etc. This can also be available through the System Tools gear icon under Notes but with the ability to put a date and time so that it appear on the chart as well.

Flex time for saved profiles. This would allow some very flexible configurations. Such as different charging options, sell options and other voltage related things.

Reports based on parameter of choice over a period of time, i.e, generator run days and time, solar collected over time etc

software that can show what the load is using all day

Hi,

What would be good that I didn't mention in the recent survey would be the ability to specify a run period when starting the generator manually under AGS - allowing you to start but then specify, say 3hrs, and forget it rather than having to remember (or be in internet coverage) to turn off. It would be good to be able to set the default run period for this facility. It is cumbersome having to do via Exercise or Must Run plus I use these for standard run cycles.

cheers

chris morris

Hello running this system at 30 volts on a 24 volts system with 5 battery instead of 4 is way bettery for batterys each battery in a 6 volt system will drop at least 1 to 2 volts in banks per battery so keeping volts pretty much up in volts mean longer lasting batterys but the refloat need to be change on flooded battery from 26.5 to 30 volts

Estimate soc for nickeliron batteries

Simply let us display charts: they should automatically display, you shouldn't have to send them to us.

Display AGS Timers

Power flow chart for DC only system

Daily maximum load Peak indicator in kW and the time this happened.

would like to see inverter output voltage over time on a graph to look for inverter outages due to low battery voltage. I assume that data will still log even if the inverter shuts off due to low voltage.

Ability to update PVOutput.org every 5 minutes with relevant data for different reporting.

Add a CT to the buss output from the AC Coupled inverters so the Mate knows what is being produced and it can be metered and graphed.

glad to see you are aware of the Mate3 failing to connect. I bought another one because I thought mine was bad. Good to know you are working the issue. Thanks, let me know when cured. Are you going to provide failure notification via text message? Best

Be able to CLONE settings from like devices. For example, I can make all my settings on one CC and then clone them to the other ones in my system, Or, when I make a change it should ask if I want this change applied to all other like devices.