General
-
Display AGS Timers on dashboard
View AGS Timers on dashboard
2 votes -
More user settings!
More user defined settings--for example, for legacy inverters, the capability for user to enter appropriate info. Also for legacy inverters and off-grid users, capability to add info about generator use (the grid isn't involved, so power must either be solar or generator).
2 votes -
Add to chart grid outages and excess solar indicators
Graph grid power outages and excess solar availability on the dashboard chart.
(e.g. green + marker on hours with sleeping charge controllers, red x markers on hours with no grid available)
2 votes -
GVFX3648 top-off charging in HBX mode.
How about amending the HBX code to allow we HBX users to be able to charge our batteries from the grid during night time hours? This is much preferable to bring to fool the system by using the “sell” mode and pretending that the input is coming from a non-existent generator, as I read some people in the forums do.
A number of us see no reason why HBX could not have a safe period during night when a user could allow the GVFX3648 inverters in a split or single-phase setup to charge the battery bank with their built-in chargers.…
2 votes -
Device auto-discovery / configuration
Automatically set Mate3 configuration parameters using vendor provided configuration data for device being added. Make it so Mate3 cannauto-discovery hardware.
2 votes -
Alerts for Power Supply
An email Alert for when there is a loss of Mains or generator power and another alert for when mains or generator supply starts again.
2 votes -
Historical sunlight info vs production for my location
Historical sunlight info: Access to a data base with historical info on amount of sunlight in my area day by day so that I can compare production to past weather info
2 votes -
Current Peak stats
Display Current Peak stats per hour.
You display hourly, daily, ... yearly peak stats.2 votes -
I would really like to see the inverter transformer temperature display option.
I would really like to see the inverter transformer temperature display option.
2 votes -
Color Scheme in the Power Flow area
When the batteries are low, the battery status in the Power Flow area becomes "Yellow". This becomes almost unreadable against the white back ground of the web page. Perhaps a different color would make it easier to read than "Yellow"
See Attached.
Thanks,
MJ
2 votes -
2 votes
-
Smooth transition from HBX mode to backup battery power during a storm related grid outage
Can my smart storage system which consists of 40kW PV with 8 GS8048A inverters, 12 cc FM80-150VDC and two battery banks of 24 Energy Cell OPzV 2000 batteries for a total of 48 batteries. I basically have a grid tied energy autonomous system running off HBX mode and at night I run off my batteries until I meet my Voltage or SOC parameter which for most nights I am good to go until sunrise without tapping into the grid.
I live in South Florida and My question here can there be a simple way to run off HBX as I…2 votesThanks for your feedback! Here, we deal with OpticsRE issues, but I have passed this along to our product management team for consideration and clarification.
-
1 vote
-
Power flow chart for DC only system
Power flow chart for DC only system
1 vote -
Alow synchronistion of chart with utility billing period
Add more time frames for the charting.
eg. Last 7 days, Last 30 days1 vote -
Display bar chart data between hour markers as per integration period
Move bar chart data from centred around hour marker to between hour markers as the accumulation time actually is.
1 vote -
Automatic update of PVOutput.org
Ability to update PVOutput.org every 5 minutes with relevant data for different reporting.
1 vote -
Selecting Data and Summing them
Highlight specific times of the day and calculate the same numbers as shown in the top right of the browser
1 vote -
Add fixture of Automatic status of pv generation on daily base like sma system
Add fixture of generating Automatic status email of pv generation on daily base like sma system
1 vote -
Location display for site in continous movement
Allow disabling the site latitude and longitude coordinates or displaying the weather information. Unfortunately the lat/log setting is static. So, when the site is a remote vehicle OpticRE does not display the correct continuously changing location data.
1 vote
- Don't see your idea?